r&s®fs-ag真人试玩网址

for phase coherent measurements

  • 概览

key facts

  • frequency range 100 mhz to 6 ghz
  • phase coherent two rf channel operation
  • design, test and calibration of multi antenna systems

brief description

the r&s®fs-z10 coherence unit in combination with two rohde & schwarz r&s®fsq or r&s®fsg signal and spectrum analyzers enables phase-coherent rf measurements such as measuring phase, timing and gain differences of two rf signals.

features

the r&s®fs-z10 coherence unit comes with a control software running on a pc. it controls the complete test setup, and calculates and displays the test results.it captures the i/q data of the sampled rf signals from the analyzers and calculates the signal differences based on the i/q data.

specifications

general data of the r&s®fs-z10 coherence unit
supported signal and spectrum analyzers r&s®fsq, r&s®fsg
frequency range 100 mhz to 6 ghz

key facts

  • frequency range 100 mhz to 6 ghz
  • phase coherent two rf channel operation
  • design, test and calibration of multi antenna systems
  • measurement of phase, timing and amplitude difference of rf signals
  • compensation of phase, timing and amplitude differences based on the i/q data for further analysis

brief description

the r&s®fs-z10 coherence unit in combination with two rohde & schwarz r&s®fsq or r&s®fsg signal and spectrum analyzers enables phase-coherent rf measurements such as measuring phase, timing and gain differences of two rf signals. moreover, it can compensate the phase, timing and gain difference of the digitized rf signal for further calculations. the r&s®fs-z10 focusses on measurements on multi-antenna systems in aerospace and defense as well as in mobile communications, for instance mimo beamforming.

features & benefits

the r&s®fs-z10 coherence unit comes with a control software running on a pc. it controls the complete test setup, and calculates and displays the test results.it captures the i/q data of the sampled rf signals from the analyzers and calculates the signal differences based on the i/q data. this enables the compensation of the signal differences and saves the compensated or non-compensatedi/q data for further analysis.

the settings specified in the graphical user interface of the control software are used to configure the analyzers automatically. there are three different modes of operation:

  • calibration mode: automatic compensation of signal differences (phase, timing and/or amplitude) in the test setup including cables for connecting the device under test
  • measurement mode: measurement of signal differences (phase, timing and/or amplitude) between the signals of device under test
  • compensation mode: compensation of signal differences (phase, timing and/or amplitude) of the device under test

the r&s®fs-z10 coherence unit supports the r&s®fsq or r&s®fsg signal analyzers from rohde & schwarz. this concept reduces investment costs because it allows existing equipment to be reused without modification and provides accurate measurement results:

  • high performance signal analyzers with excellent rf performance
  • signal analysis bandwidth up to 120 mhz with low evm

specifications

general data of the r&s®fs-z10 coherence unit
supported signal and spectrum analyzers r&s®fsq, r&s®fsg
frequency range 100 mhz to 6 ghz
signal analysis bandwidth (depending on base instrument) r&s®fsq: 28 mhz (optional 120 mhz)
r&s®fsg: 28 mhz
inputs rf in1, rf in2, cal in, trig in
outputs rf out1, rf out2, cal out1, cal out2,
trig out1, trig out2, trig out3
accuracy phase: < 3°, nominal
timing: <8.33 ps, nominal (at 1 ghz)
gain: < 0.3 db, nominal
r&s®fs-z10 control software
numerical results phase, timing and gain difference of measurement and calibration
graphical results capture buffer display
compensation phase, timing and gain (optional)
modes of operation calibration mode, compensation mode, measurement mode
high accuracy mode a specific high-accuracy data file comes with each r&s®fs-z10. this file contains information about the gain and phase differences of the r&s®fs-z10 paths over frequency and thus further improves the measurement accuracy of the overall test setup.
谢谢。

您的要求已成功发送!

我们会尽快与您取得联系。

您的 罗德与施瓦茨团队

获取演示仪器

请输入您的询问。
请输入您的名字。
请输入您的姓名。
请输入有效的电子邮件地址。
请输入您的公司名称。
请输入城市名称。
请输入您的邮政编码。

请输入您的国家/地区。
推广许可

我同意通过以下方式接收罗德与施瓦茨提供的信息:


这意味着什么?

我同意,在网站imprint中提到的rohde & schwarz gmbh & co. kg和罗德与施瓦茨实体及分支机构 可出于营销和广告之目的(例如提供特价优惠和折扣促销信息)而通过选定渠道(电子邮件或邮政信件)与我联系并提供相关信息,包括但不限于测试与测量、安全通信、监测与网络测试、广播电视与媒体以及网络安全领域的产品和ag真人试玩网址的解决方案相关信息

您的权利

您可以随时发送电子邮件至 撤销此同意声明,邮件主题注明“unsubscribe”即可。此外,我们发送给您的每一封电子邮件中都含有电子邮件取消订阅链接。有关个人数据使用和撤销程序的详情,请参阅“隐私声明”

请输入图示字符
show captcha
输入错误。
do not enter data in this field
谢谢。

您的要求已成功发送!

我们会尽快与您取得联系。

您的 罗德与施瓦茨团队

获取报价

请输入您的询问。
请输入您的名字。
请输入您的姓名。
请输入有效的电子邮件地址。
请输入您的公司名称。
请输入城市名称。
请输入您的邮政编码。
请输入您的电话号码。

请输入您的国家/地区。
推广许可

我同意通过以下方式接收罗德与施瓦茨提供的信息:


这意味着什么?

我同意,在网站imprint中提到的rohde & schwarz gmbh & co. kg和罗德与施瓦茨实体及分支机构 可出于营销和广告之目的(例如提供特价优惠和折扣促销信息)而通过选定渠道(电子邮件或邮政信件)与我联系并提供相关信息,包括但不限于测试与测量、安全通信、监测与网络测试、广播电视与媒体以及网络安全领域的产品和ag真人试玩网址的解决方案相关信息

您的权利

您可以随时发送电子邮件至 撤销此同意声明,邮件主题注明“unsubscribe”即可。此外,我们发送给您的每一封电子邮件中都含有电子邮件取消订阅链接。有关个人数据使用和撤销程序的详情,请参阅“隐私声明”

请输入图示字符
show captcha
输入错误。
do not enter data in this field
谢谢。

您的要求已成功发送!

我们会尽快与您取得联系。

您的 罗德与施瓦茨团队

请求信息

请输入您的询问。
请输入您的名字。
请输入您的姓名。
请输入有效的电子邮件地址。
请输入您的公司名称。
请输入城市名称。
请输入您的邮政编码。

请输入您的国家/地区。
推广许可

我同意通过以下方式接收罗德与施瓦茨提供的信息:


这意味着什么?

我同意,在网站imprint中提到的rohde & schwarz gmbh & co. kg和罗德与施瓦茨实体及分支机构 可出于营销和广告之目的(例如提供特价优惠和折扣促销信息)而通过选定渠道(电子邮件或邮政信件)与我联系并提供相关信息,包括但不限于测试与测量、安全通信、监测与网络测试、广播电视与媒体以及网络安全领域的产品和ag真人试玩网址的解决方案相关信息

您的权利

您可以随时发送电子邮件至 撤销此同意声明,邮件主题注明“unsubscribe”即可。此外,我们发送给您的每一封电子邮件中都含有电子邮件取消订阅链接。有关个人数据使用和撤销程序的详情,请参阅“隐私声明”

请输入图示字符
show captcha
输入错误。
do not enter data in this field
联系ag真人官方入口
获取报价 获取演示仪器 获取信息

下载

related products
网站地图