r&s®ts-ag真人试玩网址

automotive dut supply and load switching up to 50 a

key facts

  • four high-power channels for currents up to 50 a
  • four medium-power channels for currents up to 2 a
  • switching voltage up to 30 v

brief description

the r&s®ts-psm5 is the innovative implementation of a rugged, modular switching device to make high-current switching an intrinsic part of your test system.

features collapsed

  • ruggedized mechanical construction
  • industrially approved virginia panel corp. power connector available for sophisticated test receiver deployment
  • suitable virginia panel corp. gemini test receivers available for the r&s®tsvp chassis

specifications

interface
control bus can 2.0b (1 mbit/s)
rear i/o connector compactpci, 110 pins

key facts

  • four high-power channels for currents up to 50 a
  • four medium-power channels for currents up to 2 a
  • switching voltage up to 30 v
  • integrated current measurement via current sensors and analog bus coupling
  • rear i/o access to the power signals for unique flexibility during system integration and seamless adaptation to power supplies and loads within a system paradigm based on r&s®powertsvp
  • unique comprehensive selftest and measurement of relay contact resistance
  • support by the r&s®ts-lsrl signal routing library provides intelligent and secure switch path computing

brief description

the r&s®ts-psm5 is the innovative implementation of a rugged, modular switching device to make high-current switching an intrinsic part of your test system.

the r&s®ts-psm5 high-power switching module was developed to add high-current switching up to 50 amps to the standard functionality of the r&s®tsvp test system versatile platform.

powerful and flexible switching capabilities are combined with ruggedized signal connection and high availability ecured by switching cycle monitoring. the r&s®ts-psm5 can be used in both the r&s®compacttsvp (r&s®ts-pca3) and the r&s®powertsvp (r&s®ts-pwa3).

a switch cycle counter for reliable operation and monitoring strain of the relays is implemented by an fram accessible by the on-board microprocessor. readings can be retrieved from the module via the ivi switch driver.

features & benefits

  • key features
    • ruggedized mechanical construction
    • industrially approved virginia panel corp. power connector available for sophisticated test receiver deployment
    • suitable virginia panel corp. gemini test receivers available for the r&s®tsvp chassis
    • high-quality cage clamp terminal blocks for reliable power cabling and convenient dismantling
    • switch cycle counter
  • typical applications
    • distribution of a power supply to multiple duts
    • flexible distribution of power supplies to duts including sense lines via medium-power relays
    • connection of test loads, original loads or simulated and electronic actuators in automotive test scenarios
    • multiplexing of power supplies and electronic loads
    • switching of dut supplies and loads with optional current measurement via current/voltage converters
    • routing of measurement signals to adjacent modules via analog measurement bus
    • automotive and general purpose switch simulation

specifications

 
application in the r&s®tsvp platform r&s®compacttsvp or r&s®powertsvp two slots on front
interface
  control bus   can 2.0b (1 mbit/s)
  dut connector (front) r&s®ts-psm5b high-power switching module none
  r&s®ts-psm5 high-power switching module with vpc connector bracket tripaddle signal/mini power module, receiver, 16/16 positions (virginia panel corporation)
contacts:
  • mini power, receiver, 12 to 14 awg, 50 µ gold
  • signal, receiver, tripaddle, 7 amp, 20 to 24 awg, 30 µ gold
  rear i/o connector compactpci 110 pins
  power 2 x 12 pins
channel switching characteristics
50 a high-power channels 1)   4 channels
relay type   zettler az983
switching voltage dc 24 v (max.)
switching current dc 50 a (max.)
switching power dc 1120 w (max.)
operate/release time   < 14 ms (typ.)
switching duty cycle at maximum operating frequency of 1 hz 1 : 10 (on : off)
short path high-power channels 1)   2 paths
relay type   zettler az987
switching voltage dc 16 v (max.)
switching current dc 30 a (max.)
switching power dc 480 w (max.)
operate/release time   < 4 ms (typ.)
2 a medium power channels   4 channels
relay type   axicom im03
switching voltage dc 30 v (max.)
  ac (peak) 46 v (max.)
switching current   2 a (max.)
switching power dc 60 w (max.)
  ac 62.5 va (max.)
operate/release time   < 6 ms (typ.)
analog measurement bus access and coupling relays
switching voltage dc 30 v (max.)
  ac (peak) 46 v (max.)
switching current   1 a (max.)
switching power dc 10 w (max.)
  ac 10 va (max.)
operate/release time   < 0.5 ms (typ.)
conditions
temperature range   23 °c ±5 °c
additional error specified by the temperature coefficient in the range   5 °c to 18 °c and
28 °c to 40 °c
warm-up   30 minutes
shunt resistor (2 a medium power channels)    
  nominal value   22 mω (nom.)
  accuracy correction values included, measured by r&s®ts-psam ±(1 % 4 ma)
temperature coefficient   ±75 ppm/k
i-to-v converter (50 a high-power channels)    
  type   lem cas 15
  theoretical sensitivity   41.67 mv/a (nom.)
  accuracy correction values included, measured by r&s®ts-psam ±(1 % 60 ma)
temperature coefficient   ±40 ppm/k
general data
power consumption reset state 5 v/0.3 a
  all chx relays activated, one channel connected to analog bus 5 v/1.5 a
environmental conditions    
  temperature operating temperature range 5 °c to 40 °c
  storage temperature range –10 °c to 60 °c
  damp heat   40 °c, 80 % rel. humidity, steady state,
in line with en 60068-2-30
mechanical resistance    
  vibration sinusoidal 5 hz to 55 hz, 0.15 mm amplitude const.,
55 hz to 150 hz, 0.5 g const.,
in line with en 60068-2-6
  random 10 hz to 300 hz, acceleration 1.2 g (rms),
in line with en 60068-2-64
  shock   40 g shock spectrum, in line with mil-std-810e,
method 516.4, procedure i
product conformity    
  electromagnetic compatibility eu: in line with emc directive 2004/108/ec applied harmonized standards:
en 61326-1 (industrial environment),
en 61326-2-1,
en 55011 (class a),
en 61000-3-2,
en 61000-3-3
  electrical safety eu: in line with
low voltage directive 2006/95/ec
applied harmonized standard,
in line with en 61010-1
dimensions (w x h x d) r&s®ts-psm5 40 mm × 174 mm × 316 mm
(1.58 in × 6.85 in × 12.44 in)
  r&s®ts-prio5 40 mm × 130 mm × 180 mm
(1.58 in × 5.12 in × 7.09 in)
weight r&s®ts-psm5b 945 g (2.08 lb)
  r&s®ts-psm5 1213 g (2.67 lb)
  r&s®ts-prio5 292 g (0.64 lb)
calibration interval recommended for highest accuracy 24 months

1) if the contact-applied voltage and contact-applied current are small, contact resistance may become a larger value due to a small amount of film on a contact surface.

谢谢。

您的要求已成功发送!

我们会尽快与您取得联系。

您的 罗德与施瓦茨团队

获取演示仪器

请输入您的询问。
请输入您的名字。
请输入您的姓名。
请输入有效的电子邮件地址。
请输入您的公司名称。
请输入城市名称。
请输入您的邮政编码。

请输入您的国家/地区。
推广许可

我同意通过以下方式接收罗德与施瓦茨提供的信息:


这意味着什么?

我同意,在网站imprint中提到的rohde & schwarz gmbh & co. kg和罗德与施瓦茨实体及分支机构 可出于营销和广告之目的(例如提供特价优惠和折扣促销信息)而通过选定渠道(电子邮件或邮政信件)与我联系并提供相关信息,包括但不限于测试与测量、安全通信、监测与网络测试、广播电视与媒体以及网络安全领域的产品和ag真人试玩网址的解决方案相关信息

您的权利

您可以随时发送电子邮件至 撤销此同意声明,邮件主题注明“unsubscribe”即可。此外,我们发送给您的每一封电子邮件中都含有电子邮件取消订阅链接。有关个人数据使用和撤销程序的详情,请参阅“隐私声明”

请输入图示字符
show captcha
输入错误。
do not enter data in this field
谢谢。

您的要求已成功发送!

我们会尽快与您取得联系。

您的 罗德与施瓦茨团队

获取报价

请输入您的询问。
请输入您的名字。
请输入您的姓名。
请输入有效的电子邮件地址。
请输入您的公司名称。
请输入城市名称。
请输入您的邮政编码。
请输入您的电话号码。

请输入您的国家/地区。
推广许可

我同意通过以下方式接收罗德与施瓦茨提供的信息:


这意味着什么?

我同意,在网站imprint中提到的rohde & schwarz gmbh & co. kg和罗德与施瓦茨实体及分支机构 可出于营销和广告之目的(例如提供特价优惠和折扣促销信息)而通过选定渠道(电子邮件或邮政信件)与我联系并提供相关信息,包括但不限于测试与测量、安全通信、监测与网络测试、广播电视与媒体以及网络安全领域的产品和ag真人试玩网址的解决方案相关信息

您的权利

您可以随时发送电子邮件至 撤销此同意声明,邮件主题注明“unsubscribe”即可。此外,我们发送给您的每一封电子邮件中都含有电子邮件取消订阅链接。有关个人数据使用和撤销程序的详情,请参阅“隐私声明”

请输入图示字符
show captcha
输入错误。
do not enter data in this field
谢谢。

您的要求已成功发送!

我们会尽快与您取得联系。

您的 罗德与施瓦茨团队

请求信息

请输入您的询问。
请输入您的名字。
请输入您的姓名。
请输入有效的电子邮件地址。
请输入您的公司名称。
请输入城市名称。
请输入您的邮政编码。

请输入您的国家/地区。
推广许可

我同意通过以下方式接收罗德与施瓦茨提供的信息:


这意味着什么?

我同意,在网站imprint中提到的rohde & schwarz gmbh & co. kg和罗德与施瓦茨实体及分支机构 可出于营销和广告之目的(例如提供特价优惠和折扣促销信息)而通过选定渠道(电子邮件或邮政信件)与我联系并提供相关信息,包括但不限于测试与测量、安全通信、监测与网络测试、广播电视与媒体以及网络安全领域的产品和ag真人试玩网址的解决方案相关信息

您的权利

您可以随时发送电子邮件至 撤销此同意声明,邮件主题注明“unsubscribe”即可。此外,我们发送给您的每一封电子邮件中都含有电子邮件取消订阅链接。有关个人数据使用和撤销程序的详情,请参阅“隐私声明”

请输入图示字符
show captcha
输入错误。
do not enter data in this field
网站地图